How To Install Webmin on Ubuntu 18.04
Step 1 — Installing Webmin
First, we need to add the Webmin repository so that we can easily install and update Webmin using our package manager. We do this by adding the repository to the /etc/apt/sources.list file.
Open the file in your editor:
Then add this line to the bottom of the file to add the new repository:
Save the file and exit the editor.
Next, add the Webmin PGP key so that your system will trust the new repository:
Next, update the list of packages to include the Webmin repository:
Then install Webmin:
Once the installation finishes, you’ll be presented with the following output:
OutputWebmin install complete. You can now login to
https://your_server_ip:10000 as root with your
root password, or as any user who can use `sudo`.
Now, let’s secure access to Webmin by putting it behind the Apache web server and adding a valid TLS/SSL certificate.
Step 2 — Securing Webmin with Apache and Let’s Encrypt
To access Webmin, you have to specify port 10000 and ensure the port is open on your firewall. This is inconvenient, especially if you’re accessing Webmin using an FQDN like webmin.your_domain We are going to use an Apache virtual host to proxy requests to Webmin’s server running on port 10000. We’ll then secure the virtual host using a TLS/SSL certificate from Let’s Encrypt.
First, create a new Apache virtual host file in Apache’s configuration directory:
Add the following to the file, replacing the email address and domain with your own:
This configuration tells Apache to pass requests to http://localhost:10000, the Webmin server. It also ensures that internal links generated from Webmin will also pass through Apache.
Save the file and exit the editor.
Next, we need to tell Webmin to stop using TLS/SSL, as Apache will provide that for us going forward.
Open the file /etc/webmin/miniserv.conf in your editor:
Find the following line:
Change the 1 to a 0 This will tell Webmin to stop using SSL.
Next we’ll add our domain to the list of allowed domains, so that Webmin understands that when we access the panel from our domain, it’s not something malicious, like a Cross-Site Scripting (XSS) attack.
Open the file /etc/webmin/config in your editor:
Add the following line to the bottom of the file, replacing your_domain with your fully-qualified domain name.
Save the file and exit the editor.
Next, restart Webmin to apply the configuration changes:
Then enable Apache’s proxy_http module:
You’ll see the following output:
OutputConsidering dependency proxy for proxy_http:
Enabling module proxy.
Enabling module proxy_http.
To activate the new configuration, you need to run:
systemctl restart apache2
The output suggests you restart Apache, but first, activate the new Apache virtual host you created:
You’ll see the following output indicating your site is enabled:
OutputEnabling site your_domain.
To activate the new configuration, you need to run:
systemctl reload apache2
Now restart Apache completely to activate the proxy_http module and the new virtual host:
Note: Ensure that you allow incoming traffic to your web server on port 80 and port 443 as shown in the prerequisite tutorial How To Install Linux, Apache, MySQL, PHP (LAMP) stack on Ubuntu 18.04. You can do this with the command sudo ufw allow in "Apache Full".
Navigate to http://your_domain in your browser, and you will see the Webmin login page appear.
Warning: Do NOT log in to Webmin yet, as we haven’t enabled SSL. If you log in now, your credentials will be sent to the server in clear text.
Now let’s configure a certificate so that your connection is encrypted while using Webmin. In order to do this, we’re going to use Let’s Encrypt.
Tell Certbot to generate a TLS/SSL certificate for your domain and configure Apache to redirect traffic to the secure site:
You’ll see the following output:
OutputSaving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator apache, Installer apache
Obtaining a new certificate
Performing the following challenges:
http-01 challenge for your_domain
Enabled Apache rewrite module
Waiting for verification...
Cleaning up challenges
Created an SSL vhost at /etc/apache2/sites-available/your_domain-le-ssl.conf
Enabled Apache socache_shmcb module
Enabled Apache ssl module
Deploying Certificate to VirtualHost /etc/apache2/sites-available/your_domain-le-ssl.conf
Enabling available site: /etc/apache2/sites-available/your_domain-le-ssl.conf
Enabled Apache rewrite module
Redirecting vhost in /etc/apache2/sites-enabled/your_domain.conf to ssl vhost in /etc/apache2/sites-available/your_domain-le-ssl.conf
-------------------------------------------------------------------------------
Congratulations! You have successfully enabled https://your_domain
You should test your configuration at:
https://www.ssllabs.com/ssltest/analyze.html?d=your_domain
-------------------------------------------------------------------------------
The output indicates that the certificate was installed and Apache is configured to redirect requests from http://your_domain to https://your_domain.
You’ve now set up a secured, working instance of Webmin. Let’s look at how to use it.
Step 3 – Using Webmin
Webmin has modules that can control everything from the BIND DNS Server to something as simple as adding users to the system. Let’s look at how to create a new user, and then explore how to update software packages using Webmin.
In order to log in to Webmin, navigate to http://your_domain and sign in with either the root user or a user with sudo privileges.
Managing Users and Groups
Let’s manage the users and groups on the server.
First, click the System tab, and then click the Users and Groups button. From here you can either add a user, manage a user, or add or manage a group.
Let’s create a new user called deploy which could be used for hosting web applications. To add a user, click Create a new user, which is located at the top of the users table. This displays the Create User screen, where you can supply the username, password, groups and other options. Follow these instructions to create the user:
- Fill in Username with
deploy. - Select Automatic for User ID.
- Fill in Real Name with a descriptive name like
Deployment user. - For Home Directory, select Automatic.
- For Shell, select /bin/bash from the dropdown list.
- For Password, select Normal Password and type in a password of your choice.
- For Primary Group, select New group with same name as user.
- For Secondary Group, select sudo from the All groups list, and press the -> button to add the group to the in groups list.
- Press Create to create this new user.
When creating a user, you can set options for password expiry, the user’s shell, or whether they are allowed a home directory.
Next, let’s look at how to install updates to our system.
Updating Packages
Webmin lets you update all of your packages through its user interface. To update all of your packages,, click the Dashboard link, and then locate the Package updates field. If there are updates available, you’ll see a link that states the number of available updates, as shown in the following figure:
Click this link, and then press Update selected packages to start the update. You may be asked to reboot the server, which you can also do through the Webmin interface.
Conclusion
You now have a secured, working instance of Webmin and you’ve used the interface to create a user and update packages. Webmin gives you access to many things you’d normally need to access through the console, and it organizes them in an intuitive way. For example, if you have Apache installed, you would find the configuration tab for it under Servers, and then Apache.
Explore the interface further, or check out the Official Webmin wiki to learn more about managing your system with Webmin.
Comments
Post a Comment